MSI RTX 5090 Suprim Liquid SOC review: overclocked, water-cooled

NVIDIA’s GeForce RTX 5090 is a non -controversial highly powerful user graphics card, but Which 5090 is the best? In terms of price, the answer is the cheapest that you can find – perhaps a steep $ 2000 edition of founders – but if you are willing to spend even more and want to be perfectly advanced?

In this lucky scenario, MSI Water Cold RTX 5090 pushes sperm liquid succus. With nominal price 00 2500, it (at least) is above 25 % MSRP, so how much do you unlock the extra performance out of the box with this ultra -premium offer? Are there any additional benefits in terms of thermals, noise and overclumping capacity? And what is the point of construction of PC with an additional 360 mm radiator to deal with it?

Learn this, we have driven the Superium liquid through a part of our usual battery gaming benchmark, seeing the RT and Raster’s performance in the most recent sports scenes in numerous resolutions. We have tested with the default “silent” profile and high -ranking “gaming” profile, and compared these results with the original edition of the founders of 5090. Our Some has yielded some of the results, which features a small core watch and a high -size collision with the memory bandout.

Before we are included in the results of the benchmark, let’s cover the expectations of our performance based on the physical design of the card and its species.

Amazingly unlike the compact founder edition card, the sperm liquid is a bit of an animal – though it is mostly below the fact that it is permanently associated with a 360 mm radiator with two 450 mm taps. The GPU itself is a dual slot design like FE, which makes it relatively easier to install, but it is still capable at 280x148x51mm – and of course 39 360 mm radiator, which is 394x121x55 mm, means that SFF matters will not be enough. The card weighs only 3.0kg, while the entire package is only under 4.3kg – largely.

The liquid uses 575W in silent mode and maximizes the 600W 12V-2×6 power cable in its gaming mode, which selects the mood through a physical switch on the board. The power can be provided directly through the compatible ATX 3.0+ PSUS or is connected to four 8 pin PCIE cables using the adapter provided. This is not an angle because it is on the FE card to prevent inappropriate tension on the cable, but the modified connector should stop the chairing that experiences an RTX 4090 per unit. Along with the usual HDMI 2.1 port, there are three display port 2.1B ports, allowing the 4K 240Hz HDR display to be connected with DSC (display stream compression) or 4k 480Hz with DSC.

Given the species, we are looking for a maximum promotion of the basic watches that enabled gaming mode, or a reasonable four percent in silent mode. There is no memory overklock here, but as it has previously mentioned that gaming mode also faces a maximum of 600W to provide at least 575W from 600W to 16 pin connectors. We will take a look at the overcuping later in this piece.

We are using a top end system around the fastest gaming CPU, all our results, AMD Ryzen 7 9800x3dTo transfer the load to the maximum graphics card. We have 32 GB Courser Venus DDR 5-6000 CL 30 memory, a high-end Asrock X670e Taechi Mader Board and one. 1000W Course PSU.

With all of this, let’s enter the benchmark.

MSI Jeforus RTX 5090 Liquid Superium Analysis

• Introduction (this page)
• RT Bench Marx: Alan Week 2, a Plague Story: Request, Hitman: The World of Sillent
• RT Benchmark: F1 24, Dying Light 2, Cyberpank 2077
• Game Benchmark: Sinwa’s Story: Heliblade 2, F1 24, Cyberpin 2077
• Game Benchmark: Allen Week 2, a plague story: Request, Hitman: Killing World
• OC Benchmark: Dying Light 2, Cyberpank 2077, Forza Horizon 5
• Create results, notes and recommendations