Soon, the Nintendo Switch will officially arrive on 2 TV benches to replace the OG system. Whether you deal with your setup or the parents have dominated the residential room, you have no doubt that the console will have to do a bit again to ensure its real visual ability. To help it, Nintendo offers access to accessories consistency, which covers HDMI cable support, but its guidance is not completely accurate.
Nentity’s “Switch and Nintendo Switch ends on 2 devices” PageThe company says the old console HDMI cable is “not compatible” with the new gaming handheld. Although there is a left -handed box that aims to clarify things, instead of additional information, you should only use the wire that comes with the sophisticated system to “maximize performance”.
The reason I am all hot and upset with this advice is that the old cable will still actually work with switch 2. Therefore, it is not strictly compatible, but since it is proud of its old HDMI 1.4 specifications, it will be used with warnings. Namely, the dock will only be able to output 4K 30 HHz Max, while modern 2.0 and 2.1 standards can kill 4K 60HZ and more. In direct words, you may find things a little smaller on the UHD display using the old cable as the handheld will only run in dock mode in 30 frames per second.
So, why is any of these matters? Well, forgive me for being a fool, but I’m already photographing a scenario where some players or their unaware parents hang out in a new dock hanging from their gaming TV from their gaming TV, for convenience, it is technically doing it technically. Nintendo’s current advice does not indicate that doing so would mean not to take advantage of the higher frame rate and instead suggest that it will not work at all.
For example, Nintendo will include some kind of software solution that will inform the players if they get something older than HDMI 2.0 in the switch 2 dock. That way, they will not think that they have really got the right wire because the console is showing on their screen in 4K. But, at least, Nentity can make it clear on the device’s compatibility page so that if anyone reads it and using OG switch cords, they can improve the situation.
To make things more complicated, an alternative accessories compatibility page specifically says that you should use the switch 2 “ultra -high -speed HDMI cable” which is included in the box. This terms are usually used to refer to sharp HDMI 2.1 cables, but the person you are getting with handheld will be HDMI 2.0 because this system will not kill 4k 120Hz like PS5 or Xbox Series X.
The use of this specific term can come with cost implications if the future switch 2 owners need to replace the HDMI cable that comes with the system. I am ready to bet that most people are hiding HDMI 2.0 cables in their home, and they will provide handheld everything needed to kill 4K 60fps. However, if you look for the “Ultra High Speed” options online, some players may end up thinking that they need something with 2.1 support.
Once I put a hand on the handheld, I will dive in the best methods of switch 2 setup and offer enough advice. But, for now, here’s a TLDR when it comes to connecting it to a TV. By default, you should use the HDMI cable that comes with the console because it is proud of the correct explanations. The old switch cable is really compatible, but you will not be able to meet the 60FPS output of the system with the right refresh rate to fully enjoy the speed.
Those of you who are with an old TV or even with 1080p or 1440p gaming monitor will be able to use the original switch HDMI cable without interruption, especially since the game supports 120Hz in full HD like Metrod Prime 4. I will still recommend using new, but if you plan to use your handheld on multiple exterior screen, it can prevent you from purchasing extra wires. At the same time, those of you who need extra wire will probably not need to choose more expensive HDMI 2.1 options, which in turn you have a cable that is around 4K 60Hz around your hideout.
Oh, and if you are hunting for Nintendo Switch 2 pre -orders today, do not add any HDMI cables to your cart with handheld. Retailers have a habit that they are trying to buy additional accessories to consumers with each purchase, and since you need to tighten on a TV, there is a zero to take extra wires.
Preparation of Nentity’s handheld? Peek Upcoming switch 2 games And 2 Switch to rear compatibility For a complete list of adventures for the system. You would like to pee us too Nintendo Switch 2 vs Steam deck If you are still trying to make a decision between the two, then Roundon.
